Roof Anchor – Weld to Embed Plate w/ Curved Back Plates

  • This anchor is typically used on hollow core slabs in new construction.
  • The cast in embed structure is cast into adjacent “cores” and a weldment anchor (without base plate) is later welded to the top of the embed plate.
  • These anchors facilitate easy and cost-effective on-site installation.
  • The standard height for these anchors is 12″ and the maximum allowable height is 18″.
  • The embed plate and the stud spacing vary with the size of the hollow core.
  • Use 8″ or 11″ tall flat/conventional flashing only when the base plate is embedded into concrete.

Download our Safety and Tie Back Anchors Brochure here for more information.

See Product Size Variations below.

For further inquiry on this product, please contact us at 1800 461.0575

Description

Product Size Chart

Below is a chart of our standard sizes. More are available upon enquiry.

Model No. Anchor Height Slab Thickness Min. Embed Depth Add Ins Flashing Type Flashing Height Hollow Core Spacing
FA-PBE94-00U4-1208S 12″ 8 7″ None 8″
FA-PBE94-00U4-1208S-FL1 12″ 8 7″ Flashing Conventional 8″ 8″
FA-PBE94-00U4-1508S 15″ 8 7″ None 8″
FA-PBE94-00U4-1508S-FL1 15″ 8 7″ Flashing Conventional 8″ 8″
FA-PBE94-00U4-1808S 18″ 8 7″ None 8″
FA-PBE94-00U4-1808S-FL1 18″ 8 7″ Flashing Conventional 8″ 8″
FA-PBE94-00U4-1808S-FL2 18″ 8 7″ Flashing Conventional 11″ 8″