Roof Anchor – Bolt Through – Reinforced

  • The standard height of a four-stud bolt through roof anchor (reinforced) is 18 inches.
  • This anchor suits all 3-1/2 inch flashings.
  • Use conventional/ flat flashings for conventional/flat roof membranes and inverted/ bell-shaped flashings for inverted roof membranes.
  • A four-stud bolt through a reinforced anchor is used when the thin slab needs to be reinforced.
  • Typically, it is used as an end anchor or corner support with a double lanyard horizontal lifeline.
  • With bolt through roof anchors, the designers must consider accessibility to the underside of the slab.
  • Look for drop ceilings, Avoid drywalls, Plaster ceilings, and be aware of hallways, tall ceiling conditions and conduit.

 

Download our Safety and Tie Back Anchors Brochure here for more information.

See Product Size Variations below.

For further inquiry on this product, please contact us at 1800 461.0575

Description

Product Size Chart

Below is a chart of our standard sizes. More are available upon enquiry.

Model No. Anchor Height  Slab Thickness + 2in  Exposed Bolt Length  Flashing Type Flashing Height Reinforcing HSS
FA-PBE73-00A4-1808S-R 18″ 5″ – 8″ 12″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1808S-R-FL1 18″ 5″ – 8″ 12″ Conventional 8″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1808S-R-FL2 18″ 5″ – 8″ 12″ Conventional 11″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1808S-R-FL6 18″ 5″ – 8″ 12″ Inverted 8″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1808S-R-FL7 18″ 5″ – 8″ 12″ Inverted 11″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1812S-R 18″ 9″ – 12″ 16″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1812S-R-FL1 18″ 9″ – 12″ 16″ Conventional 8″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1812S-R-FL2 18″ 9″ – 12″ 16″ Conventional 11″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1812S-R-FL6 18″ 9″ – 12″ 16″ Inverted 8″ HSS 2″ x 4″ x 24″
FA-PBE73-00A4-1812S-R-FL7 18″ 9″ – 12″ 16″ Inverted 11″ HSS 2″ x 4″ x 24″