Roof Anchors – Cast In Place – with Back Plates
- The standard height of this four-stud plate roof anchor is 12, 15 and 18 inches.
- This anchor suits all 3-1/2 inch flashings.
- Generally, if the base plate is fully embedded and flush with the concrete, a standard conventional flashing can be used.
- This anchor is designed for a thin slab (less than 6 inches).
- The General Contractor MUST cast the base plate of the anchor so that it is fully embedded and/or flush with the concrete slab, otherwise, the anchor may not meet load requirements.
- If the anchor sits directly on the bottom of the concrete form, ensure that the area below is designed with a drop/finished ceiling otherwise the plates will be visible when the form is removed.
- The maximum height of this 3-1/2 inch anchor is limited to 18 inches.
Download our Safety and Tie Back Anchors Brochure here for more information.
See Product Size Variations below.
Description
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
Model No. | Anchor Height | Slab Thickness Min. | Embed Depth | Add Ins | Flashing Type | Flashing Height |
EF-FA-PBE74-00A4-0605S | 6″ | 5″ | 4-1/4″ | None | ||
EF-FA-PBE74-00U4-1805EPS | 18″ | 5″ EPICORE SLAB | 5″ | None | ||
EF-FA-PBE74-02I4-2205S | 22″ | 5″ | 4-1/4″ | None | ||
EF-FA-PBE74-02U4-2005S | 20″ | 5″ | 4-1/4″ | None | ||
FA-PBE74-00A4-1205S | 12″ | 5″ | 4-1/4″ | None | ||
FA-PBE74-00A4-1205S-FL1 | 12″ | 5″ | 4-1/4″ | Flashing | Conventional | 8″ |
FA-PBE74-00A4-1505S | 15″ | 5″ | 4-1/4″ | None | ||
FA-PBE74-00A4-1505S-FL1 | 15″ | 5″ | 4-1/4″ | Flashing | Conventional | 8″ |
FA-PBE74-00A4-1805S | 18″ | 5″ | 4-1/4″ | None | ||
FA-PBE74-00A4-1805S-FL1 | 18″ | 5″ | 4-1/4″ | Flashing | Conventional | 8″ |
FA-PBE74-00A4-1805S-FL2 | 18″ | 5″ | 4-1/4″ | Flashing | Conventional | 11″ |
FA-PBE74-03I4-2405S | 24″ | 5″ | 4-1/4″ | None |