Roof Anchor – Adhesive
- The standard height of an adhesive roof anchor is 12, 15 and 18 inches.
- This anchor suits all 3-1/2 inch flashings.
- Flat/conventional flashings are to be used for conventional roof membranes.
- Bell-shaped/inverted flashings are to be used for inverted roof membranes.
- With adhesive roof anchors, the designers need not consider accessibility to the underside of the slab.
- The slab thickness must be at least 6 inches thick in order to have the minimum stud embedment depth of 5″.
- This anchor can also be used in Double-Lanyard HLL system.
Download our Safety and Tie Back Anchors Brochure here for more information.
See Product Size Variations below.
Description
Product Size Chart
Below is a chart of our standard sizes. More are available upon enquiry.
Model No. | Anchor Height | Slab Thickness Min. | Embed Depth | Add Ins | Flashing Type | Flashing Height | Epoxy Type |
FA-PBE78-00A4-1205S | 12″ | 6″ | 5″ | None | HVU Glue Capsule | ||
FA-PBE78-00A4-1205S-FL1 | 12″ | 6″ | 5″ | Flashing | Conventional | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1205S-FL6 | 12″ | 6″ | 5″ | Flashing | Inverted | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1505S | 15″ | 6″ | 5″ | None | HVU Glue Capsule | ||
FA-PBE78-00A4-1505S-FL1 | 15″ | 6″ | 5″ | Flashing | Conventional | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1505S-FL6 | 15″ | 6″ | 5″ | Flashing | Inverted | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1805S | 18″ | 6″ | 5″ | None | HVU Glue Capsule | ||
FA-PBE78-00A4-1805S-FL1 | 18″ | 6″ | 5″ | Flashing | Conventional | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1805S-FL2 | 18″ | 6″ | 5″ | Flashing | Conventional | 11″ | HVU Glue Capsule |
FA-PBE78-00A4-1805S-FL6 | 18″ | 6″ | 5″ | Flashing | Inverted | 8″ | HVU Glue Capsule |
FA-PBE78-00A4-1805S-FL7 | 18″ | 6″ | 5″ | Flashing | Inverted | 11″ | HVU Glue Capsule |