Roof Anchor – Cast-in-Cage

  • The standard height of a cast in cage roof anchor is 18 inches.
  • The cage is cast into the concrete and the anchor base is installed during roofing.
  • Inverted/bell-shaped flashing must be used.
  • Generally only used when a standard cast in place roof anchor is not in stock and is not readily available.
  • To meet the scheduled concrete pour, the stainless cage can be made up quickly and sent to the site.
  • This anchor is much more expensive than a standard cast in place roof anchor.
  • The maximum height of this 3-1/2 inch anchor is limited to 18 inches.
  • The minimum Concrete Slab thickness is 6 inches.

 

Download our Safety and Tie Back Anchors Brochure here for more information.

See Product Size Variations below.

For further inquiry on this product, please contact us at 1800 461.0575

Description

Product Size Chart

Below is a chart of our standard sizes. More are available upon enquiry.

Model No. Anchor Height Slab Thickness Min. Embed Depth Min. Add Ins Flashing Type Flashing Height
FA-PBE79-00A4-1206S 12″ 6″ 5-1/4″ None
FA-PBE79-00A4-1206S-FL1 12″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1206S-FL6 12″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1506S 15″ 6″ 5-1/4″ None
FA-PBE79-00A4-1506S-FL1 15″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1506S-FL6 15″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1806S 18″ 6″ 5-1/4″ None
FA-PBE79-00A4-1806S-FL1 18″ 6″ 5-1/4″ Flashing Conventional 8″
FA-PBE79-00A4-1806S-FL2 18″ 6″ 5-1/4″ Flashing Conventional 11″
FA-PBE79-00A4-1806S-FL6 18″ 6″ 5-1/4″ Flashing Inverted 8″
FA-PBE79-00A4-1806S-FL7 18″ 6″ 5-1/4″ Flashing Inverted 11″